Strawberry Planter Wood Plans for a Vertical Garden

If you're looking to grow strawberries in a unique and space-saving way, consider building a strawberry planter wood plan for a vertical garden.

A vertical garden is a great option for small spaces, and strawberry planter wood plans can be designed to fit any size or shape of garden bed.

Strawberry plants can thrive in a vertical garden, providing a bountiful harvest of fresh fruit.

To get started, you'll need a piece of wood that's at least 6 inches wide and 12 inches tall, which is the minimum size recommended for a strawberry planter wood plan.

Curious to learn more? Check out: Rain Gutter Strawberry Garden

To build a three-tiered strawberry planter, you'll need some wood boards. We got our materials from Home Depot, where we picked up interior/exterior grade boards.

For the wood boards, we used 1″ x 6″ x 8ft boards for the tiers and 2″ x 4″ x 8ft boards for the post that supports the strawberry planter boxes.

Here's an interesting read: Mahogany Wood Boards

The size and amount of boards were based on what was available in the store to minimize cutting, and the size of each strawberry planter box we wanted to have.

Here's a breakdown of the wood boards we used:

The total wood board cost was around $30, which is a pretty good deal considering how many strawberry plants we can fit in there.

We ended up planting ~30 strawberry plants, 10 per tier, and now we're ready to maximize our strawberry harvest this summer.

A fresh viewpoint: Planters for Succulent Plants

To build a 3-tiered strawberry planter, you'll need to start by assembling three long planter boxes that can be stacked vertically. This requires using exterior grade wood glue to stick the boards together, followed by brad nails to secure them in place.

Using a miter saw to cut the wooden boards to size is essential, as it allows for precise cutting based on calculations. You'll also need to pre-drill pilot holes before screwing things together to prevent wood from splitting.

Attach the supporting legs with 2″ screws, starting from the top planter box, and then attach the horizontal bar to connect the two legs. This will keep the legs together and distribute the weight evenly.

Explore further: Olive Wood Boards

To build a 3-tiered strawberry planter, start by optimizing the design to reduce material waste and make it ideal for growing strawberries vertically. This will help you create a unique and beautiful planter for a smaller area.

The DIY process is pretty straightforward, and you can use a design inspired by Ana White's tiered flower planter plan as a starting point. Make sure to update the design to suit your needs.

Using a stronger wood board, such as a 2×4, for the legs is essential to support the weight of the three planter boxes. This will ensure stability and prevent the planter from toppling over.

Cut the wooden boards to size using a miter saw, following the calculations from the build plan ebook.

For your interest: Timber Roof Trusses Design

Cutting the wood boards to size is a crucial step in building your three-tiered strawberry planter. This process can be a bit tedious, but it's essential to get it right to ensure your planter is sturdy and functional.

For this project, you'll need to cut the wood boards based on your calculation to get the specific sizes needed for each component. The authors used a miter saw to cut the wooden boards to size, which saved them time and effort.

You'll need to cut the 1″ x 6″ x 8ft board for the 3 planter boxes that serve as tiers, and the 2″ x 4″ x 8ft board for the post that will support the strawberry planter boxes.

Here's a breakdown of the boards you'll need to cut:

Remember to drill drainage holes in the bottom boards of each planter box to prevent water from accumulating and rotting the roots of your strawberry plants. The authors drilled drainage holes for each planter box, and you should do the same to ensure your plants thrive.

Curious to learn more? Check out: Are Strawberry Plants Invasive

Now that your wooden strawberry planter is standing on its own, it's time to attach the remaining two planter boxes. This step is pretty straightforward.

Just sandwich the box between two front legs, and use screws to secure them. Leave an even spacing between each planter box, just like we did with 2 inches between each box.

The finished strawberry planter is 34.5″ wide and 24″ tall.

Each planter box is 31.5″ wide, 7″ deep, and 5.5″ high.

We can fit around 10 strawberry plants in each planter box, which means the entire tiered planter can hold about 30 plants.

This spacing allows for a good balance between having many plants for fruit production and avoiding overcrowding.

The planter boxes are longer but shallower, making them perfect for smaller garden spaces.

Assembling your strawberry planter boxes is a crucial step in creating a sturdy and functional planter. First, you'll need to assemble three long planter boxes by sticking boards together with exterior grade wood glue.

To make sure they're super sturdy, use brad nails to secure them in place. If you have a pocket hole jig, it's even better to connect the boards using pocket holes.

Bar clamps are a lifesaver when screwing things together - they make it much easier and prevent wood from splitting. Pre-drilling pilot holes first will also make the assembly process smoother.

Attaching legs to your planter boxes is the next step. You'll want to start by attaching the supporting legs with 2″ screws, beginning from the top planter box.

A good trick is to use a bar clamp to clamp the front legs to the top planter box, allowing you to adjust the whole thing by sliding the front legs and cutting off any excess length.

You may find that the front or back legs are slightly longer than the other, so be sure to leave an extra couple of inches for wiggle room when making a rough cut.

To start using your strawberry planter, you'll need to fill it with dirt. This requires approximately 18 cubic feet of dirt, which can be a bit of a challenge to transport, especially if you're using an electric car like I did.

You'll need to pour the soil into the planter, being mindful not to tear any holes in the weed fabric. If you do accidentally tear a hole, you can simply insert some more fabric inside the slats to cover it up.

Cut holes in the planter for your strawberry plants, and then insert the plants into the soil.