
Droopy leaves on your Philodendron Selloum are often a sign of underwatering.
Overwatering can also cause droopy leaves, especially if the soil is consistently waterlogged. The roots of the plant may rot, leading to leaf drop.
Check the soil moisture by sticking your finger into the soil up to the first knuckle. If the soil feels dry, it's time to water.
Watering your Philodendron Selloum once a week is a good rule of thumb, but this may vary depending on the humidity and temperature of your environment.
Causes of Drooping
Philodendron selloum leaves drooping can be a common issue, but it's often a sign that something is off.
The plant may not be able to maintain its life cycle properly if some of its requirements aren't met.
A simple oversight can save your plant, but neglecting these needs can cause injury.
If the plant is not receiving enough light, the leaves may droop as a response.
Lack of water can also cause the leaves to droop, as the plant struggles to stay hydrated.
Pest and Disease Problems

Pest and disease problems can cause philodendron selloum leaves to droop. Pests like spider mites, aphids, and mealybugs can suck the sap from your plant, causing the leaves to weaken.
Inspect your plant regularly for any signs of pests. Look under the leaves and along the stems, especially if you notice tiny specks, webbing, or sticky residue.
If you find any unwelcome critters, remove them with a gentle spray of water or treat the plant with insecticidal soap. Healthy roots are firm and white, while rotten roots are mushy and brown.
Root rot is a common disease caused by overwatering. To check for root rot, remove the plant from its pot and inspect the roots. Trim away any affected roots and repot in fresh soil.
Here are some steps to take when treating pests:
- Wipe the leaves with a damp cloth to remove pests manually.
- Use insecticidal soap or neem oil as a natural treatment.
- Isolate the affected plant to prevent the pests from spreading to others.
Growth and Environmental Factors
Philodendron Selloum leaves drooping can be a frustrating issue, but understanding the environmental factors at play can help you tackle the problem. This plant thrives in bright, indirect light, so if it's not getting enough light, it might start to droop.
Take a look at this: Should You Leave a Light on for a Cat?
Too little light can cause slow growth, small leaves, and stems that stretch towards the nearest light source. Consider moving your philodendron to a spot where it can receive more light, like near a window with filtered sunlight, or using a grow light if natural light is not an option.
Temperature and humidity also play a significant role in your plant's health. Philodendrons prefer temperatures between 65°F and 80°F, so if it's too cold, they might sulk and droop. To boost humidity, you can mist your plant regularly, place it on a tray with pebbles and water, or invest in a humidifier.
Here are some tips to help you adjust your philodendron's environment:
- Move your plant away from direct sunlight to prevent scorching.
- Use sheer curtains to filter the light if necessary.
- Rotate your plant occasionally to ensure all sides receive light and grow evenly.
- Keep your plant in a room with a stable temperature between 65°F and 80°F.
- Mist your plant regularly to boost humidity.
Soil and Potting Issues
Soil and potting issues can be a major growth hindrance for your philodendron. A good quality potting mix suitable for tropical plants is a must.
Philodendrons like well-draining soil that's rich in organic matter. Compacted soil can suffocate the roots and lead to wilting. Adding perlite or orchid bark can improve drainage.

A pot that's too small can restrict root growth, while one that's too large might hold too much moisture. Choose a pot that's one size bigger than your plant's root ball.
Ensure the pot has drainage holes to prevent waterlogging. Repot your philodendron every couple of years to refresh the soil and give it room to grow.
Here are some tips to help you choose the right pot:
- Look for pots with built-in drainage holes.
- Consider the size of the pot in relation to the plant's root ball.
- Choose a pot made from a breathable material, such as terracotta.
Lighting Issues
Lighting Issues can be a major growth inhibitor for your Philodendron. Too little light can cause slow growth, small leaves, and stems that stretch towards the nearest light source.
If your plant is sitting in a dimly lit corner, it might not be getting the energy it needs to stay upright and happy. Consider moving it to a spot where it can receive more light, like near a window with filtered sunlight.
Too much direct sunlight can scorch the leaves, causing them to wilt and turn yellow or brown. Philodendrons prefer indirect light, so if they're sunbathing too much, they might get sunburned.
Explore further: Should I Leave a Light on for My Cat?
To fix a Philodendron that isn't getting enough light, simply move it to a sunnier position. If that doesn't work, you could also consider getting a grow light for your plant if your space is naturally shaded or for the winter months.
Here are some tips to ensure your Philodendron gets the right amount of light:
- Move your philodendron to a spot where it can receive bright, filtered light, about a few feet away from a south or east-facing window.
- Use sheer curtains to filter the light if necessary.
- Rotate your plant occasionally to ensure all sides receive light and grow evenly.
Temperature and Humidity
Philodendrons are tropical plants that thrive in warm temperatures and high humidity. They prefer temperatures between 65°F and 80°F.
If your home is too dry, it could be causing your plant to wilt. Philodendrons love humidity, so if the air in your home is too dry, especially in winter when heaters are on, it might cause wilting.
To boost humidity, you can mist your plant regularly or place a humidifier nearby. Grouping your philodendron with other plants can also create a micro-humid environment.
Here are some tips to increase humidity around your philodendron:
- Mist your plant regularly.
- Place a humidifier nearby.
- Group your philodendron with other plants.
- Consider placing a tray with water and pebbles under the pot to evaporate and increase humidity naturally.
If you notice your plant wilting, check the temperature around it and move it to a more stable environment if needed. Philodendrons prefer temperatures between 65°F and 80°F, and sudden temperature changes can stress them out.
By providing the right temperature and humidity conditions, you can help your philodendron thrive and stay healthy.
Growth Habits and Shedding

Philodendron Selloum's large leaves can naturally droop under their own weight, so if your plant is otherwise healthy and growing well, it might just be a normal part of its growth habit.
You can gently stake the plant or provide support if the drooping is causing aesthetic concerns.
Older leaves will naturally yellow and droop before falling off, which is a completely normal process.
Simply prune away any dead leaves to keep your plant looking its best.
Common Issues and Solutions
If your Philodendron Selloum's leaves are drooping, it's likely due to a lack of light. This is because Philodendrons need bright, indirect light to grow at their best, and if they don't get enough, their growth will slow down.
You can tell if your Philodendron isn't getting enough light by looking at its growth: if the stems are growing, but the leaves aren't, it's a sign that the plant is searching for more light, leading to leggy growth.
Additional reading: How Much Does It Cost to Leave a Light On?
To fix this issue, simply move your Philodendron to a sunnier position, or consider getting a grow light for your plant if your space is naturally shaded or for the winter months.
Here are some tips for troubleshooting common issues with your Philodendron:
- Lack of light: move the plant to a sunnier position or use a grow light
- Poor soil conditions: use a good quality potting mix suitable for tropical plants and consider adding perlite or orchid bark to improve drainage
- Watering habits: ensure the soil isn't too wet or dry
Solution
Keep your soil a little wet, especially during hot summer days when it needs extra watering than winter. Water at least once a week on hot days to prevent wilting.
The light colour and dryness of your soil will signal the need for water. It's a simple yet effective way to check if your plant needs hydration.
Try to water your philodendron at least once a week, especially during hot summer days when it needs extra watering than winter.
Droopy leaves on your philodendron can be a sign of overwatering, so be sure to check the soil moisture before watering again.
With the right care and attention, your philodendron can thrive once again.
A different take: When to Pick Basil Leaves from Plant
Common Issues

If your Philodendron is dropping leaves, it's usually a sign that something is wrong. Dropping leaves can be a symptom of a few issues, but each problem can be diagnosed by looking at other areas of the plant.
A lack of light is a common problem that can cause your Philodendron to drop its leaves. Philodendrons need bright, indirect light to grow at their best, and if they don't get enough light, you'll quickly see their growth slow down.
If your Philodendron is growing leggy, it's a sign that it's searching for more light. This can be fixed by moving the plant to a sunnier position or using a grow light if your space is naturally shaded or during the winter months.
The right soil and pot are crucial for your Philodendron's health. Poor soil conditions or an inappropriate pot can lead to wilting and other issues.
To fix soil and pot problems, use a good quality potting mix suitable for tropical plants and avoid using heavy garden soil. Consider adding perlite or orchid bark to improve drainage.
Here's an interesting read: Leaves Falling off Jade Plant

Here are some tips for choosing the right pot for your Philodendron:
- Choose a pot that's one size bigger than your plant's root ball.
- Ensure the pot has drainage holes to prevent waterlogging.
- Repot your Philodendron every couple of years to refresh the soil and give it room to grow.
By understanding the possible causes of droopy leaves and taking action to fix them, you can help your Philodendron regain its strength and thrive.
Drooping Leaves Indicators
Philodendron selloum leaves droop due to unfulfilled requirements, which can be a simple oversight that saves your plant.
It's a hardy plant, but it can't maintain its life cycle properly without proper care.
A consciousness about its needs can save your plant from drooping leaves.
The absence of certain requirements can make your plant injured, so it's essential to get it right.
If you notice your philodendron selloum leaves drooping, it may be a sign that something is off with its care.
On a similar theme: Split Leaf Philodendron Indoor Care
Frequently Asked Questions
How to revive selloum?
To revive a Selloum, improve drainage by adding perlite or orchid bark to the soil and avoid overwatering to prevent waterlogging. Proper soil aeration and drainage can help your Selloum recover and thrive.
Featured Images: pexels.com


