How to Reset Kasa Smart Light Switch?

Author Ella Paolini

Posted Sep 8, 2022

Reads 132

Workspace with modern devises and books

Kasa smart light switches are one of the most popular products on the market. They offer a wide range of features and benefits, but sometimes users may need to reset their switches. Here are some instructions on how to reset a Kasa smart light switch:

First, locate the reset button on the switch. This button is usually located on the back of the switch or on the bottom. Once you have found the reset button, press and hold it for about 10 seconds. After 10 seconds, release the button and the switch should reset itself.

If the switch does not reset, you may need to manually reset it by flipping the breaker that powers the switch. To do this, find the breaker box and locate the breaker that controls the switch. Flip the breaker to the off position and wait for about 30 seconds. Flip the breaker back on and the switch should reset.

If you are still having trouble resetting the switch, you can try contacting Kasa customer support for assistance.

How do I reset my Kasa smart light switch?

There are a few different ways that you can reset your Kasa smart light switch. One way is to simply hold down the reset button for about 10 seconds until the light on the switch turns off. Once the light turns off, release the button and the switch should reset itself. Another way to reset the switch is to remove the cover of the switch and then press and hold the reset button for about 10 seconds. Again, the light on the switch will turn off and you can release the button. The switch should reset itself. If neither of these methods work, you can always try unplugging the switch from the power outlet and then plugging it back in. This should reset the switch and allow you to try the methods above again.

How do I factory reset my Kasa smart light switch?

If you're reading this, then you probably need to factory reset your Kasa smart light switch. Maybe it's not working correctly, or maybe you just want to start from scratch. Either way, here's how to do it.

First, make sure that the light switch is powered off. You can do this by either unplugging it from the wall outlet or by flipping the switch to the off position. Once the light switch is off, press and hold the reset button for 3 seconds. The reset button is located on the back of the switch, near the bottom.

Once you've held the reset button for 3 seconds, the light switch will enter factory reset mode and the LED will start flashing. In factory reset mode, the light switch will revert to its default settings and will no longer be controlled by the Kasa app. To exit factory reset mode, just press the reset button again.

That's all there is to it! Now you know how to factory reset your Kasa smart light switch.

How do I hard reset my Kasa smart light switch?

Kasa smart light switches are a new type of light switch that can be controlled via a smartphone or tablet. They offer a number of advantages over traditional light switches, including the ability to remotely control the switch, set timers, and create schedule. However, like any new technology, they can occasionally malfunction or experience glitches. If you find yourself in this situation, you may need to do a hard reset of your Kasa smart light switch.

There are a few different ways to hard reset your Kasa smart light switch. The most common method is to simply hold down the reset button on the back of the switch for about 10 seconds. This will cause the switch to reset and reboot. If this doesn't work, or if you can't find the reset button, you can also try unplugging the switch from the power outlet for about 10 seconds and then plugging it back in.

Once you've successfully reset your Kasa smart light switch, you should be able to resume using it as normal. If you continue to experience problems, you may need to Contact customer support.

How do I delete my Kasa smart light switch from the Kasa app?

If you're trying to delete your Kasa smart light switch from the Kasa app, there are a few steps you'll need to follow. First, open up the Kasa app on your smartphone or tablet. Then, locate the smart light switch in the list of devices. Once you've found it, tap on the device to open its settings. At the bottom of the device's settings page, you'll see a Delete button. Tap on this button to delete the device from your Kasa account.

How do I remove my Kasa smart light switch from the wall?

It's easy to remove your Kasa smart light switch from the wall; here's how:

1. First, identify the switch you want to remove by looking for the small raised button on the front.

2. Take a picture of the back of the switch so you'll know which wires go where.

3. Using a Phillips screwdriver, remove the two screws that hold the switch in place.

4. Carefully pull the switch away from the wall, being careful not to damage the wires.

5. Unscrew the wire cover plate from the switch.

6. Disconnect the wires from the switch and remove the switch from the wall.

7. That's it! Your switch is now removed.

How do I unplug my Kasa smart light switch?

Kasa smart light switches are one of the most popular types of light switches on the market. They allow you to control your lights from your smartphone or tablet, and you can even set schedules and timers to turn your lights on and off automatically. However, sometimes you may want to unplug your Kasa smart light switch. Here's how to do it.

First, open the Kasa app on your smartphone or tablet. Then, tap the menu icon in the top-left corner of the screen. Next, tap the Devices tab.

Now, find the Kasa smart light switch that you want to unplug in the list of devices. Tap the switch to select it.

Finally, tap the Delete button in the top-right corner of the screen. Confirm that you want to delete the device by tapping the Delete button again.

Your Kasa smart light switch is now unplugged and will no longer be controlled by the Kasa app.

How do I change the WiFi on my Kasa smart light switch?

If you want to change the WiFi on your Kasa smart light switch, there are a few things that you need to do. First, you need to go into the Kasa app and click on the settings icon in the top right corner. Next, you need to click on the WiFi icon and then click on the edit icon next to the WiFi name that you want to change. Once you click on the edit icon, you will be able to type in the new WiFi name and password. Finally, click on the save icon and you will be all set!

How do I connect my Kasa smart light switch to a new WiFi network?

If you're reading this, you probably just bought a new Kasa smart light switch, Congratulations! You're about to enter a new era of enhanced home automation and convenience. In this guide, we'll show you how to connect your new Kasa smart light switch to a new WiFi network.

Even if you've never installed a light switch before, don't worry. Kasa's smart light switch is designed for easy installation. In most cases, it will only take about 15 minutes to get your new smart light switch up and running.

Before we get started, there are a few things you'll need:

A Phillips screwdriver

A working ground wire (this is usually green or bare copper)

2x AAA batteries

Your new Kasa smart light switch

Now that you have everything you need, let's get started.

1. Turn off the power to the circuit that you'll be working on. This is important for safety. Locate the main breaker box and flip the switch for the circuit you'll be working on.

2. Remove the faceplate from your old light switch. Use a Phillips screwdriver to remove the two screws that hold the faceplate in place.

3. Remove the two screws that hold the switch in place.

4. Pull the switch out from the wall box.

5. Take a look at the wires that are attached to the switch. There are usually three wires: a black (hot), a white (neutral), and a green (ground).

6. Detach the wires from the old switch. If the wires are held in place by screws, loosen the screws and remove the wires. If the wires are held in place by clips, squeeze the clips and slide the wires out.

7.Attach the black (hot) wire to the top terminal on the new switch. If your switch has a brass colored terminal, this is the "live" or "hot" terminal.

8.Attach the white (neutral) wire to the bottom terminal on the new switch. If your switch has a silver colored terminal, this is the "neutral" terminal.

9. If your light switch has a green or bare copper wire, attach this to the green "ground" terminal on the new switch.

10. Screw the new switch into place and screw on the faceplate.

11.

How do I update the firmware on my Kasa smart light switch?

Installing a custom firmware on your Kasa smart light switch is a great way to get more out of the device. While the stock firmware is good, custom firmware can give you access to more features and customization options. This guide will show you how to update the firmware on your Kasa smart light switch to a custom firmware.

Before you begin, you will need to download the custom firmware for your Kasa smart light switch. You can find a list of custom firmware for the Kasa smart light switch here. Once you have downloaded the firmware, you will need to unzip it.

Next, you will need to connect your Kasa smart light switch to your computer via the micro USB port. Once the device is connected, you will need to put it into bootloader mode. To do this, press and hold the reset button on the underside of the device for 3 seconds.

Once the device is in bootloader mode, you will need to open the custom firmware file that you unzipped earlier. Inside of this file, there should be a file called "flash-all.bat". Double click on this file to begin the firmware update process.

The update process will take a few minutes to complete. Once it is finished, your Kasa smart light switch will reboot and you will be running the custom firmware.

Frequently Asked Questions

How do I Reset my Kasa Smart plug?

To reset your Kasa smart plug, just hold on to the power button for 5 seconds.

How to reset TP-Link Kasa Smart bulb to factory default settings?

1. Turn the light switch controlling the bulb to the OFF position. 2. Flip the light switch on and off 3 times.

How do I use my Kasa Smart Wi-Fi light switch?

To use your Kasa Smart Wi-Fi light switch, first connect it to your home network. Once it's connected, open the Kasa app and select your light switch from the list of devices. Tap the button on your light switch and say "Alexa, turn on/off" or "Google Assistant, turn on/off."

How do I put my Kasa Smart Switch into discovery mode?

To put your Kasa Smart switch into discovery mode, you will turn the switch on and hold the button until the LED starts flashing. For switches like the Lutron Caseta, rapidly tap the on button three times. On the third tap, hold the button until the dimmer lights begin to cycle.

How do I perform a soft reset on my Kasa Smart plug?

First, make sure that your Kasa Smart plug is plugged into a power outlet. Then, hold on to the power button for 5 seconds. Your Kasa Smart plug will then start flashing rapidly 2 times and slowly afterward.

Ella Paolini

Ella Paolini

Writer at iHomeRank

View Ella's Profile

Ella Paolini is a seasoned writer and blogger with a passion for sharing her expertise on various topics, from lifestyle to travel. With over five years of experience in the industry, she has honed her writing skills and developed a unique voice that resonates with readers. As an avid traveler, Ella has explored many parts of the world, immersing herself in new cultures and experiences.

View Ella's Profile