
If you're a beginner looking to create a fabric casserole dish carrier, you're in the right place. These DIY projects are perfect for those who want to add a personal touch to their cooking routine.
You'll need a few basic supplies, including a piece of fabric, a sewing machine, and some sturdy straps. The type of fabric you choose will depend on the look and feel you want to achieve.
A simple rectangular shape is a great starting point for beginners, and can be easily adapted to fit different-sized casserole dishes. The dimensions for this shape are typically around 12 inches wide and 18 inches long.
With these easy DIY fabric casserole dish carrier patterns, you can create a functional and stylish accessory for your kitchen.
Readers also liked: Baking Dish Insulated Carrier
Materials and Preparation
To make a fabric casserole dish carrier, you'll need a few essential materials. You'll need 2 yards of cotton fabric, which will provide a sturdy and durable base for your carrier.
For another approach, see: Casserole Carrier with Dish
The batting, which is a thin layer of insulating material, will help protect your dishes from scratches and chips. You'll need 1/2 yard of batting to get the job done.
Pins are a must-have for securing the fabric and batting in place. Sharp scissors will come in handy for cutting the fabric and batting to the right size.
A small bowl will be used to create a curved shape for your carrier, and a marking pen will help you mark the fabric for cutting. A measuring tape will ensure that your fabric is cut to the right size.
Here's a list of the materials you'll need to get started:
- 2 yards cotton fabric
- 1/2 yard batting
- Pins
- Small bowl
- Marking pen
- Sharp scissors
- Measuring tape
Design and Pattern
To make a fabric casserole dish carrier, you'll need some basic materials. For the exterior, you'll need 1/2 yard of cotton fabric. The lining requires another 1/2 yard of cotton fabric. You'll also need 1/3 yard of cotton fabric for the straps.
Check this out: What Is a 2 Qt Casserole Dish
You can use a fabric marker or tailor's chalk to mark lines on the carrier. A walking foot or dual feed foot for your sewing machine can be helpful, but it's not required. You'll also need an acrylic ruler, rotary cutter, and cutting mat, as well as pins and coordinating thread.
Here's a list of the required materials:
- 1/2 yard of cotton fabric for the exterior
- 1/2 yard of cotton fabric for the lining
- 1/3 yard cotton fabric for the straps
- 1/2 yard of insulated batting (such as Insul-bright batting)
- 1/4” wide Steam-a-Seam fusible tape (optional)
- a fabric marker or tailor’s chalk
- a walking foot (or dual feed foot) for your sewing machine (optional)
- an acrylic ruler, rotary cutter and cutting mat, pins, and coordinating thread
Quilted
Quilted designs can be incredibly versatile, like the quilted casserole carrier made by Bonnie at Fishsticks Designs. It can accommodate a 9″ x 13″, 8″ square, or 9″ square dish.
The quilted pattern is marked with a frixion pen, which makes it easy to recreate. This technique can be used to create a variety of designs.
The hardest part of recreating the pattern was finding long enough wooden spoons to use as handles.
Worth a look: 9 Casserole Dish
Draw with Pen or Chalk
Place your rectangle on your workspace with the exterior side up. This is where the magic happens, and your design starts to take shape.

Use a fabric marker or tailor's chalk to mark the following lines: 2 vertical lines that are 3” away from each side edge, and 2 horizontal lines to connect the vertical lines, which should be 5” away from the long top and bottom edges.
You should have a long strip that is approximately 1 1/4” x 79 1/2”. This is a crucial step in creating your design, and it's essential to get it right.
Make small tick marks at the center of each horizontal line. This will help you keep track of your measurements and ensure your design is symmetrical.
Intriguing read: When Putting Away Clean and Dry Dishes
Cake
Cake is a versatile design element that can be used in various projects. The Cake And Casserole Carrier pattern includes two versions of the carrier, making it easy to choose the one that suits your needs.
This carrier is perfect for transporting hot dishes or cakes to your next picnic or social event. It's also a great gift idea for friends and family who love to bake.
The pattern provides instructions for either a serged finished edge or bias tape, giving you the flexibility to choose the look you prefer.
Consider reading: How to Pick Kitchen Countertops
Free Patterns

You can find a variety of free casserole carrier patterns online.
One pattern, the DIY Casserole Carrier Sewing Pattern, requires a range of materials including cotton fabric, insulated batting, and a walking foot for your sewing machine.
The pattern suggests cutting 1/2 yard of cotton fabric for the exterior, 1/2 yard for the lining, and 1/3 yard for the straps.
You can also turn an ordinary placemat into a casserole cozy with the Placemat Casserole Carrier pattern.
The Insulated Casserole Carrier is another option, perfect for keeping your dish at the optimal temperature during picnics and parties.
This carrier features insulated sides, snaps, and a zipper for added security.
If you want a one-size-fits-all carrier, you can make a free casserole carrier with a single pattern that wraps up your dish like a present.
The Casserole Carrier Free PDF Pattern is available for download and includes all the necessary instructions and measurements.
If this caught your attention, see: What Size Is a 2 Qt Casserole Dish
Cutting and Preparation
To start making your fabric casserole dish carrier, you'll need to cut out the fabric strips and batting. Cutting 2 strips 5” x 40” is a good place to begin.
Take a look at this: Fabric Peonies
These strips will provide the foundation for your carrier, so make sure to cut them accurately. If you want to add an optional snap to the flaps, place a snap part at the center about 1” away from the edge of the flap.
For the main part of the carrier, you'll need to cut larger fabric pieces. Cut 2 11 inch x 38 inch pieces of fabric and 2 11 inch x 29 inch pieces of fabric.
You'll also need to cut batting pieces to match these fabric strips. Cut 1 11 inch x 38 inch piece of batting and 1 11 inch x 29 inch piece of batting.
Cutting
To cut your fabric strips, you'll need to cut two strips that are 5 inches wide and 40 inches long. Make sure to cut them accurately, as this will affect the overall appearance of your project.
If you want to add an optional snap to the flaps, place a snap part at the center of each flap, about 1 inch away from the edge.

For cutting fabric and batting, you'll need to cut two pieces of fabric that are 11 inches wide and 38 inches long, and two pieces that are 11 inches wide and 29 inches long. You'll also need to cut one piece of batting that is 11 inches wide and 38 inches long, and one piece that is 11 inches wide and 29 inches long.
To create a pattern for the fabric and batting, trace around half of a small bowl on the short ends of the 11 inch x 29 inch piece of fabric. Cut along the traced lines, and then repeat this step on the other short side.
Take a look at this: Dimensions of Kitchen Countertops
Dish
If you're planning a potluck or party, a large casserole carrier is a must-have. Fitting a 9″ x 13″ casserole dish, this type of carrier will keep your meal warm and ready to serve.
You can sew a quilted casserole carrier as a gift for a friend or family member who loves to cook and entertain. If you can sew straight lines, you're good to go.

This type of carrier is ideal for beginners who want to make a hostess gift or carry their holiday dessert to a work potluck. You can use straight lines or experiment with free-motion quilting when quilting together the two panels.
Following clear video instructions can help you sew this project with confidence.
Sewing and Assembly
To sew and assemble your fabric casserole dish carrier, you'll need a few basic supplies. You'll want to use a walking foot or dual feed foot for your sewing machine, as it's optional but highly recommended.
First, cut out your fabric pieces according to the pattern. For the straps, cut two 5” x 40” rectangles from the cotton fabric.
Next, sew the straps together to create a long loop. Fold the strip in half lengthwise and press, then open and press the long raw edges to the center. Fold the strip in half again and press. Unfold the strip at the short ends and pin the raw edges right sides together to make a very long loop.
Here's a summary of the steps to sew the straps:
- Cut two 5” x 40” rectangles from the cotton fabric
- Fold the strip in half lengthwise and press
- Open and press the long raw edges to the center
- Fold the strip in half again and press
- Unfold the strip at the short ends and pin the raw edges right sides together
To assemble the carrier, fold one of the short sides over to the front, then fold the other short side over and make the ends overlap by 3”. Pin the overlapping flaps together at the top and bottom to hold them together for the next step.
Sew the Handles
To sew the handles, start by placing the two 5” x 40” strap rectangles right sides together. Sew the short ends together with a 1/4” seam allowance.
Press the seam open to create a long 5” x 79 1/2” strip. Fold the strip in half lengthwise and press, then open and press the long raw edges to the center. Fold the strip in half again and press.
To create a long loop, unfold the strip at the short ends and pin the raw edges right sides together. Make sure there are no twists in the loop. Sew the ends together with a 1/4” seam allowance.
Finally, topstitch along both long edges of the long loop about 1/8” away from the edges.
Zipper
A zipper is an essential component in many sewing projects, including the Casserole Carrier with Zipper. It provides a secure closure for your casserole, keeping it perfectly protected in transit.
You can use a zipper to add a professional finish to your projects, as seen in the Casserole Carrier with Zipper example. A zipper can also be used to create a functional closure for bags and pouches.
In the Casserole Carrier with Zipper, a zipper is paired with snaps and sturdy handles to create a reliable and user-friendly design. This combination of closures ensures that your casserole stays secure during transport.
To use a zipper in your sewing projects, you can download a printable pattern, such as the one available on Craftsy for the Casserole Carrier with Zipper.
Check this out: How to Use a Kitchen Compost Bin
Decorative Touches
You can add a personal touch to your fabric casserole dish carrier with some decorative stitching. This can be done with just straight lines, making it a simple sewing project.
Quilting with batting inside can give your carrier extra texture and a more finished look. This is a great way to add some visual interest to your carrier.
A 9″ x 13″ casserole fits perfectly in this carrier, making it a great size for family gatherings or parties.
Frequently Asked Questions
What is the best way to transport a hot casserole dish?
For transporting a hot casserole dish, use a cooler or insulated casserole carrier for optimal results. Alternatively, wrap the dish in a towel or blanket for a quick and effective solution.
What is the best casserole carrier?
Our top pick for a casserole carrier is the Rachael Ray Expandable Lasagna Lugger, offering great value at $35. Alternatively, the LUNCIA Insulated Casserole Carrier is a budget-friendly option at just $20.
Featured Images: pexels.com


